Filter

Home > Search for "flir"
Sort By:
Page of 4
FLIR VUE mini thermal camera for drone or SUAV suas
FLIR VUE Pro 640, 19mm, 30Hz Mini Thermal Drone Camera for Drones or sUAS
Our Price: $3,699.00

FLIR Vue is an affordable thermal camera customized to give sUAS operators all of the thermal imaging capability you need at a price you can handle. Small, lightweight, affordable and easy to integrate, FLIR Vue is a snap to install and get in the air. Simply use a GoPro-compatible 10-pin mini-USB cable to give the camera 5 volts of power and get analog thermal video out to your OSD or video transmitter, and you’re ready to fly. FLIR Vue's light weight won’t drag down your flight times or throw off your aircraft’s center of gravity.

With FLIR Vue™ you get all the thermal imager you need for sUAS operations without having to pay for functionality you'll never use.
Pre-configured to give you optimal imagery in a wide variety of conditions, FLIR Vue is light enough that it won't throw off your center of gravity or impact your flight times. With simple power-in and video-out connections, it's easy to integrate and get flying on just about any platform.
Best of all, with MSRPs of only $1,499 for 336 resolution cameras and $2,999 for 640 cameras, FLIR Vue is affordable for today's commercial sUAS operations.

Easy to Connect
Just plug in a GoPro-compatible cable into the 10-pin mini-USB connector to feed the camera a regulated 5VDC power supply and get analog video out to your video transmitter or OSD, and you're ready to go. If you need more detailed information, the pinout for Vue's 10-pin mini-USB connector is available in the Vue IDD drawing under the Product Literature tab below.

Easy to Mount
Because of FLIR Vue's light weight, you’ve got lots of mounting options available to you on any kind of aircraft. Whether you want to hard-mount it or put it on a brushless gimbal, FLIR Vue can do the job.


Easy to Use
There's really nothing to it. Since all of the configuration has already been done, just power it up and go fly. But if you want to dig into the settings a little deeper, just download our Camera Controller GUI and connect FLIR Vue to your PC with a USB cable.

FOV Chart


VUE 17μ 336x256
336 6.8mm - 45° x 35°
336 9mm - 35° x 27°
336 13mm - 25° x 19°
336 19mm - N/A


VUE 17μ 640x512

640 6.8mm - N/A
640 9mm - 69° x 56°
640 13mm - 45° x 37°
640 19mm - 32° x 26°



FLIR Vue Pro Models Include:

Designed for professional use, FLIR Vue Pro is more than a thermal camera, it is a thermal measurement instrument and data recorder that adds tremendous value to your sUAS operations and services. Still with the same industry-leading thermal imaging quality and affordability as the best-selling FLIR Vue, the Vue Pro adds full data recording of thermal video and 14-bit still imagery. When connected to compatible flight control systems, it will automatically insert full aircraft geo-location and flight data information into each captured image for the easy image stitching required for mapping, survey, and precision agriculture applications.

AFFORDABLE THERMAL IMAGING AND ON-BOARD DATA RECORDING
  • Airborne thermal data recording starting as low as $1,999
  • Simple power-in/video-out interface over 10-pin mini-USB connector
  • Image settings optimized for airborne operations

ON-BOARD RECORDING OF THERMAL IMAGERY AND FLIGHT DATA TO AN ON-BOARD MICROSD CARD
  • Record real-time thermal videos in MOV format
  • Still images save aircraft’s flight information in each still image
  • MAVLink integration with convenient over RS-232 connection
FLEXIBLE, POWERFUL CAMERA CONTROL AND CONFIGURATION OPTIONS
  • Control two selectable camera functions with PWM inputs – imagery color palettes, recording start/stop, still image capture, or E-zoom setting
  • Configure your camera’s recording and control settings with our mobile app
  • Field-upgradeability make sure you’ll always have the latest features
FLIR T 70 Thermal Clip On Scope
FLIR ThermoSight T70 - FLIR T70 Advanced Combat Thermal Sight - Short Range
Our Price: $14,900.00

The low profile compliments current Rifle Combat Optics (RCO's) and minimizes height above the rail.  The ACTS-SR provides scene clarity and allows the use of false color to enable rapid target acquisition and firing solutions using a high density, color Organic Light Emitting Display (OLED). FLIR's image processor, in-line design and user-friendly button layout puts a range of image optimization tools at the operator's fingertips. A thumb-accessible joystick enables intuitive control of ThermoSight system functions (polarity selection, digital zoom, image enhancement, and impact point correction) without navigating the menu. The video output port allows operators to monitor and record the transmitted image in real-time.

The Hot Swap battery compartment can hold three AA cells or two CR123A cells. Since the ThermoSight requires only two AA cells or one CR123A cell for operation, the operator can replace depleted batteries while the unit remains active. Additionally, the compartment will operate regardless of the installed battery orientation.

Additional construction features like a shock-resistant housing that is water-tight to a depth of 66 ft, a shutter-less optical design that is nearly silent, and an included remote activation switch help make the ThermoSight T70 a full-featured thermal weapon sight for a broad range of tactical operations.

Includes:
- Carrying Case
- Remote Pressure Pad Switch
- 3 x AA Batteries
- Video Out Cable
- Lens Cleaning Kit
- Limited Two-Year Warranty
FLIR Breach 336
FLIR Breach PTQ136 320 Mini Thermal Monocular
Our Price: $2,499.00

The FLIR Breach is unlike any other thermal monocular ever created. It's tiny, lightweight, helmet mountable, and features FLIR's new miniature BOSON thermal core. The BREACH also features a FLCOS display, multiple color palettes and a compass/inclinometer.

Weighing only 7.4 ounces (210 grams), the FLIR Breach can be concealed in a pocket or mounted to a helmet with its mini-rail feature, while adding minimal weight to officers’ heavy gear. Additional features include onboard recording and seven palettes for fast detection of suspects or evidence, day or night. The advanced image processing of the internal FLIR Boson thermal core and a bright high definition display create excellent image clarity and provide better detection and classification, day or night
FLIR RS Video Recording Cable
UNV - FLIR RS Video Recording Cable for the UNV - MDVR
Our Price: $49.00

(6)

The 14 inch FLIR RS Series MDVR Cable connects your FLIR RS32, or RS64 video out port to the video input on a UNV - MDVR portable night vision mini DVR. The cable is designed with military grade braided cable protection along with multiple layers of heat shrink to withstand years of use in the field. With a total length of 14 inches, the UNV - FLIR RS MDVR cable is the perfect length to connect the FLIR RS thermal weapon sight directly to a rifle stock mounted MVDR on a fully extended AR-15 rifle stock or any standard bolt action rifle stock. The precise length of the cable creates a streamlined system eliminating excess video cable.
Thermosight Pro 320 1.5
Thermosight Pro PTS233 320 1.5X - 6X w/ DLOC-PTS
Our Price: $2,199.00

(3)

INCLUDES:
  • PTS233
  • HARD CASE
  • DLOC-PTS

The FLIR ThermoSight Pro Series sets a new standard in thermal image quality. With multiple features packed into a compact housing, the ThermoSight Pro Series delivers brilliant, clean thermal imagery in low contrast daylight scenes, as well as in total darkness. Equipped with shot activated video recording and FLIR’s patent pending High Visibility Technology (HVT) reticle, the FLIR ThermoSight Pro Series is the perfect addition to any hunting or security weapon platform. It is powered by the new FLIR Boson core, featuring a 12 μm pixel pitch sensor, industry leading on-chip video processing. The uncompressed video signal is paired with a high definition display for better detection and classification in the field.




  • On-board video recording, image capture and storage.
  • Up to 2.5 hours of recording time or up to 1,000 pictures
  • Shot activated video recording feature automatically captures before/after shot video
  • FLIR’s patent pending HVT reticle technology provides clear reticle visibility against even the most difficult to discern backgrounds
  • Multiple color palettes, reticle types and reticle colors
  • Digital compass/inclinometer for precise range and target orientation
  • Reliable quick-release Picatinny rail
High Resolutions Images of the FLIR LS-XR Thermal Imager
FLIR LS-XR 640 Thermal Monocular
Our Price: $3,599.00

FLIR's new LS-X and LS-XR handheld thermal night vision monoculars are built specifically for those who serve and protect. This powerful, yet simple imager gives Law Enforcement an unfair advantage whether searching for evidence or pursuing a suspect, all in the palm of your hand. The newest additions to this field-proven line, LS-X and the LS-XR, feature enhanced resolution displays, extended zoom capabilities, and video output. Whatever you are searching for, find it with FLIR.
USED - FLIR RECON M24 - 640x480
USED - FLIR RECON M24 - 640x480
List Price: $8,273.00
Our Price: $4,000.00

This USED FLIR M24 is in excellent condition. Please call or email us with any questions on the unit. No warranty all used gear sales are final.

The Recon® M24 is a basic, low cost thermal pocket scope for tactical observation and general purpose night vision. Rugged and submersible, the Recon M24 provides a l 640x480 image.

Link to manufacturers website:
http://www.flir.com/surveillance/display/?id=64323
Clip on night vision CO-XLR-LRF
CO-XLR-LRF Ghost/White Phosphor MG - Clip-On System L-3 Filmless White Phosphor
Our Price: $7,999.00

With the introduction of the new Armasight by FLIR CO-XLR LRF, we have pushed the boundaries of Night Vision systems further than they’ve ever gone. The Armasight by FLIR CO-XLR LRF (Clip On – Extra Long- Range) is a night vision unit that mounts in front of any existing day scope, converting the scope into a night vision-capable device with a viewing range of up to 1,500 yards. Suitable for use with most commercial and military specification daytime scopes (up to 16X magnification), the CO-XLR LRF can be mounted/dismounted on any standard Picatinny rail in seconds, with no special tools required. Because the CO-XLR LRF can be mounted in front of your existing day scope, no rezeroing is required. The CO-XLR LRF allows the user to maintain consistent positioning and shooting accuracy, all while maintaining the use of a fully familiar day scope.

The Armasight by FLIR CO-XLR LRF is intended for use by the most demanding hunter, long-range target shooter, and military or LE personnel. Its CO-LR LRF housing is designed to withstand any environmental condition.

The CO-XLR LRF is packed with innovative features like variable gain control, bright light shut-off, and wireless remote control. This night vision clip-on is designed to make long-range night shooting just as easy and accurate as daytime shooting in the same terrain.

The Armasight by FLIR CO-XLR LRF can be equipped with high-performance, Gen 2+ and Gen 3 variants image intensifier tubes, using either Green phosphor or Armasight’s “Quick Silver” and “Ghost” image intensifier tubes, which provide users with natural B&W images.

The Armasight by FLIR CO-XLR LRF can be used with an Advanced Modular Range-Finder (AMRF2200). The AMRF2200 is designed to determine the exact distance between the observer and the target. The range-finder works with any NV Clip-On system that includes an LRF option. Measurements are displayed on the range-finder’s indicators and in the FOV of any connected NV device.

The AMRF2200 is a pulsed laser range-finder, which uses a laser beam to measure distance. This semiconductor laser emits a wavelength of 905 nm. The range-finder allows you to measure distances of objects between 5-2000 meters away. With a rugged, lightweight composite housing, it is shock-resistant. An adjustable lever-cam clamping device ensures quick, easy, and reliable mounting and disassembly.
DLOC-PTS QD Mount for FLIR PTS and Armasight Zeus
DLOC-PTS QD Mount for FLIR PTS and Armasight Zeus
Our Price: $249.00

Specialized Stability for Repeatability
The DLOC-PTS was designed specifically for FLIR's line of thermal imaging scopes. The patented DLOC mounting system and manufacturing process is proven to be the most accurate and reliable QD mounting system available. You simply can't find the quality and long term repeatably of a DLOC-PTS anywhere else.
The DLOC-PTS Quick Release Mount is 45% lighter than the stock mount supplied with the FLIR PTS233.

FLIR Thermal Scopes
  • PTS233
  • PTS536

Armasight Thermal Scopes
  • Zeus 42mm Models
  • Zeus 50mm Models

The DLOC-PTS fits the following rails:
  • US MIL-SPEC 1913 Picatinny Rails
  • NATO 1913 Picatinny Ralis
  • Over-sized commercial picatinny rails

Differences between DLOC mounts and all competitors:
  • All DLOC’s grab more rail on both sides
  • Retention knob will keep mounts secure without the use of tools or user forgets
  • No tools required except for scope mounts if user desires to torque to spec
  • Absolutely the fastest mount to attach in the dark
  • Will not snag or hook your gear unlike lever type mounts
  • Will attach to all picatinny rails including those worn, damaged or not Mil-Spec
  • All parts are CNC machined, not “forged or cast” eliminating brittle components
  • All DLOC’s are made with true “QD” Quick Attach technology
  • True “Back to Zero” not ½ moa
  • Will “NOT” damage the underside, sides or top to your picatinny rail… no galling.
  • Dependable of being able to Switch optics without re-zero

DJI Zenmuse XT 640 19mm
DJI Zenmuse XT 640 19mm 30HZ - Performance
Our Price: $11,995.00

The Zenmuse XT is a FLIR thermal camera integrated with a DJI gimbal mount for use on DJI drones. The Zenmuse XT is the only integrated thermal gimbal camera of it's kind and boast an incredible feature set and performance standard.


Thermal imaging from the air has never been as easy as it is with the DJI Zenmuse XT. By combining DJI’s unrivaled expertise in gimbal technology and image transmission with the industry leading thermal imaging technology of FLIR, the Zenmuse XT is the ultimate solution for rapid and reliable aerial thermal imaging. Capture faster, with pinpoint precision, over large areas, then save them for analysis and reporting.

The camera on the DJI Zenmuse XT is developed by FLIR. It provides high-sensitivity (50mK) thermal imaging at 640/30 fps or 336/30 fps depending on the camera model. This sensitivity provides accurate temperature measurements ideal for analytics and telemetry. Both cameras are available with four lens options to meet different business needs. Stabilized and controlled by a custom DJI gimbal, it provides smooth, clear imagery and 360 degrees of seamless rotational movement.

Quickly Visualize Temperature Differences Performance model Zenmuse XT cameras display thermal imagery in real time while showing a temperature estimate at the center of the camera view, so users can quickly identify large temperature differences. Engineered for:Emergency Responders

Mounted to the Matrice 100, Matrice 200 Series, Matrice 600, or Inspire 1, the Zenmuse XT allows professionals to takeoff and capture detailed thermal aerial images in a matter of seconds.* Seamlessly integrated, the Zenmuse XT offers complete access to key DJI drone features such as a long-range video transmission, Intelligent Flight Modes, and customization through the DJI SDK.

*Older Zenmuse XT models may require an upgrade to be compatible with the M200 Series. To learn if your camera is compatible and/or needs to be upgraded, please refer to this document [link to document]. Actual flight times vary based on drone model, payload, and flight conditions. For more information about flight times for various DJI drones, please visit their corresponding webpages.

4 PURPOSE-BUILT APPLICATIONS
There are 4 apps compatible with the Zenmuse XT, each having a purpose built application.

DJI XT Pro
Thermal Imaging Made Easy Enhance your control of the Zenmuse XT thermal camera with the DJI XT Pro iOS app. Incorporating feedback from firefighters and industrial inspectors, the XT Pro app has a streamlined design that makes using the XT camera for critical missions simple and easy. • Real-time, low-latency camera view • On-screen temperature estimates • Quick access to color palette, isotherm and other settings Compatible Drones Matrice 100, Matrice 200, Matrice 600, Matrice 600 Pro, Inspire 1

DJI PILOT
Professional Flight Control
DJI Pilot is a robust Android app built specifically for enterprise-users to unleash the power of their DJI drones. DJI Pilot offers powerful flight modes and mission planning together with a streamlined design and detailed settings for businesses users. • Real-time, low-latency camera view • Intelligent flight modes • On-screen temperature estimates • Access to color palette, isotherm, and other settings Compatible Drones Matrice 200 Series Mission Profiles Fire and incident scouting, electrical inspections, search and rescue operations, solar panel inspections, building and roof inspections

DJI GS PRO Mission-Critical Flight Simplified The DJI GS Pro iPad app allows pilots to plan and control automatic flights, enabling repeatable missions for collecting accurate and actionable data. • Real-time, low-latency camera view • Plan 2D and 3D flight missions • Control automatic flight missions Compatible Drones M100,M600, M600 Pro Inspire 1 Mission Profiles Thermal site mapping, crop health mapping for precision agriculture, automatic search paths, solar farm mapping

DJI GO
Capture the World from Above
DJI’s most widely used app, for both iOS and Android devices, that includes everything from intelligent flight modes to editing and sharing features.
  • Real-time, low-latency camera view
  • Intelligent flight modes
  • On-screen temperature estimates
  • Access to color palette, isotherm and other settings
Compatible Drones
M100,M600,M600 ProInspire 1 Mission Profiles Fire scouting, electrical inspections, search and rescue operations, solar panel inspections, building and roof inspections